CADWorx Plant Not Revolving Valves, Flanges - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » CADWorx Solutions » CADWorx Plant » CADWorx Plant Not Revolving Valves, Flanges

Topic Options

#15251 - 01/14/08 11:54 AM CADWorx Plant Not Revolving Valves, Flanges
Elliott Member Registered: 03/29/07 Posts: 3 Loc: Minnesota, USA	Anyone having issues with valves or weldneck flanges revolving in CADWorx Plant? Usually happens at an angle,say 15 degrees, error says, unable to revolve. UCS object is set. Valves draw fine at 0,90,180,270 degrees?
Top

View All Topics

Entire topic
Subject	Posted by	Posted
CADWorx Plant Not Revolving Valves, Flanges	Elliott	01/14/08 11:54 AM
Re: CADWorx Plant Not Revolving Valves, Flanges	LMP	01/14/08 02:38 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Rod Abbott	01/14/08 03:37 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	MattCB	01/14/08 04:51 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Wolfe	01/14/08 06:51 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Vanman	01/14/08 10:55 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Wolfe	01/15/08 05:50 AM
Re: CADWorx Plant Not Revolving Valves, Flanges	Kather	01/17/08 09:59 AM
Re: CADWorx Plant Not Revolving Valves, Flanges	LMP	01/17/08 01:11 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	JeffR	01/17/08 09:26 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Jay M	11/09/09 10:22 AM
Re: CADWorx Plant Not Revolving Valves, Flanges	CADWorx Support	11/09/09 09:43 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Tim Storey	11/15/09 01:16 PM
Re: CADWorx Plant Not Revolving Valves, Flanges	Wolfe	11/15/09 06:38 PM

Moderator: Dominik Hepp

0 registered (), 38 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

April
Su	M	Tu	W	Th	F	Sa
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)