Allowable Temperature Range - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Allowable Temperature Range

Topic Options

#9653 - 02/05/07 03:04 PM Re: Allowable Temperature Range [Re: Y.Lee]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	Check Table 832.2. This is why the CAESAR II material data base stops at 32 degF. _________________________ Regards, Richard Ay - Consultant
Top

Entire topic
Subject	Posted by	Posted
Allowable Temperature Range	Y.Lee	02/05/07 02:54 PM
Re: Allowable Temperature Range	Richard Ay	02/05/07 03:04 PM
Re: Allowable Temperature Range	Y.Lee	02/05/07 03:21 PM
Re: Allowable Temperature Range	CraigB	02/05/07 04:17 PM
Re: Allowable Temperature Range	John C. Luf	02/05/07 06:19 PM
Re: Allowable Temperature Range	Jouko	02/06/07 06:22 AM
Re: Allowable Temperature Range	John C. Luf	02/06/07 06:54 AM
Re: Allowable Temperature Range	Y.Lee	02/06/07 11:39 AM

Moderator: Denny_Thomas, uribejl

0 registered (), 42 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM