Forcing Caesar II to choose Constant Effort Hanger

Topic Options

#8257 - 10/25/06 10:06 AM Forcing Caesar II to choose Constant Effort Hanger
Pickles Member Registered: 09/25/06 Posts: 52 Loc: Australia	G'day folks! Referring to the application guide, it says that in order to make Caesar 2 choose a Constant effort Hanger, one should specify a very small allowable travel. Say 1 inch (26mm). When I do enter 26mm in the "Rigid support displacement criteria", the resulting recommended hanger is a variable spring. Is there any way I can get around this? _________________________ Keeping it Real... Real Dumb!
Top

Entire topic
Subject	Posted by	Posted
Forcing Caesar II to choose Constant Effort Hanger	Pickles	10/25/06 10:06 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Richard Ay	10/25/06 10:25 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Bob Zimmerman	10/25/06 12:24 PM
Re: Forcing Caesar II to choose Constant Effort Ha	John C. Luf	10/25/06 05:35 PM
Re: Forcing Caesar II to choose Constant Effort Ha	Pickles	10/25/06 07:48 PM
Re: Forcing Caesar II to choose Constant Effort Hanger	Pickles	10/25/06 07:51 PM
Re: Forcing Caesar II to choose Constant Effort Hanger	John C. Luf	10/26/06 07:15 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Richard Ay	10/26/06 07:51 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Pickles	10/26/06 08:03 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Richard Ay	10/26/06 08:59 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Richard Yee	10/27/06 10:58 AM
Re: Forcing Caesar II to choose Constant Effort Hanger	Tom Van Laan	10/31/06 10:54 AM

Moderator: Denny_Thomas, uribejl