Dear Expert,

Process conditions: 93 Degree Celsius design temp. and 1960 Kpa design pressure.

Slug velocities: 8 m/s

Slug frequency: 3 Hz

Slug reaction: 11027 N

Thicknesses: 9.52 mm

Materials: API 5L Gr. B

Lengths: approximately 75 meters

Please note that the issue is 18 m height of boot is vibrating with the influence of slug is passing through 20 inch small crude inlet pipe and it is vibrating the entire big boot vessel, is it correct.

Kindly advise supporting the pipe is good or support the vessel is good.

By
Rajivgandhi