Hello,
I have a 6inch , 300# flange and I wanted to do a flange check where I was not getting results, my load cases are setup correctly where I included my temperate in the load cases of flange check.
Our input temperature that we used was 1015 deg F, where the max range for the temp in the flange check tab in Caesar 2 is 1000 deg F representing 85 Psi pressure for Peq flange check analysis. nothing is available after that range,

Now the ASME B16.5-2020 , table 2-2.5C , shows a range from -20 F to 1500 F for the A182 Gr. F347 material,
What I have to do to cover the range?
Thank you.