Originally Posted By: MattCB
I've been using the old method. Haven't heard an ETA yet on a fix.


The fix for GED / POD Processor was made available with SP1 for 2020 R2. I recall SP1 was released sometime in February this year.
Originally Posted By: MattCB
There is still an issue with GED that needs resolved with 2020r2.
Originally Posted By: MattCB
There is still an issue with GED that needs resolved with 2020r2.
Originally Posted By: Shim
I've spent 2 whole days to figure out how to populate autocad block attributes from xsl file. I am using cadworx2020r2 and I follow all the steps in the video and applied all the suggestions here but still not working. If I open 'dedug.log'file, it looks ok as below.

--------------------------------------------------------------
*** PODTools Version : 4.0.0.69 ***
*** Current user: ICDASIAPACIFIC\JoungS on Machine: WPC-312
*** GetExternalData command started at 29/04/2022 2:36:47 PM ***
*** Executing command from "C:\Project_IConfigure\ProjSTD_IConfigure\11198\Data\PODProcessorSettings.xml"
*** Processing POD: ""
Migrating GED script from Version 3.0 to Version 4.0
*** Diagnostic level: Normal
Processing initialisation file "C:\CADWorx 2020 R2\Plant\Isogen\I-Configure\Core Components\PODTools.xml"
Getting external data for pipeline with Name="50-PW-0050-G1"

>>> Processing PIPELINE commands:

EXECUTE tag(0) Pipeline: 50-PW-0050-G1
* Attributes(ATTRIBUTE101) set to "50"
* Attributes(ATTRIBUTE102) set to "PW"
* Attributes(ATTRIBUTE103) set to "0050"
* Attributes(ATTRIBUTE104) set to "G1"
* Attributes(ATTRIBUTE105) set to "XXXX"
* Attributes(ATTRIBUTE106) set to "XX"
* Attributes(ATTRIBUTE107) set to "10% RT"
* Attributes(ATTRIBUTE108) set to "10% MT"
* Attributes(ATTRIBUTE109) set to "WATER"
* Attributes(ATTRIBUTE110) set to "XXX Kpa(g)"
* Attributes(ATTRIBUTE111) set to "P-1002"
* Attributes(ATTRIBUTE112) set to "P-1015"
* Attributes(ATTRIBUTE113) set to "PIDX"
* Attributes(ATTRIBUTE114) set to "CLEAN"
* Attributes(ATTRIBUTE115) set to "X"
* Attributes(ATTRIBUTE116) set to "XX"
* Attributes(ATTRIBUTE117) set to "U/G POTABLE WATER LINE FROM THE EXISTING PW LINE"
*** GetExternalData command completed at 29/04/2022 2:36:48 PM ***

------------------------------------------------------------------------

But each time when IGO run, the cadworx freeze about 5 min. and generate isometric drawing but 0kb and can't open.
I follow everything but I don't know what I am missing? In cadworx2020, should I do a bit different way?
I will be much appreciated if someone find out what is wrong.
Thanks.


This sounds like you need to install SP1 for 2020 R2.
_________________________
Cadworx User