I am currently working on a very thin pipeline with D/t ratio larger than 100; I modelled one of the bends in FePipe (module bends with staunchion) in order to have it calculate the actual SIF and flexibility values. (needless to say I input 0 for all the required information for the trunnion)

just to confirm; the primary SIFs as calculated by FePipe would be input for the stress indexes in CII. right?

for the flexibility part, FePipe gives me Ki and Ko, any suggestion on how I can add it up in CII only one input "K-Factor" ?

and by the way, I don't know why but the code computed values by FePipe and CII are different.

many thanks in advance,