HI.

I know that when designing PSV, use three way support + Hold down support for the PSV inlet and outlet as shown in the picture.
1. Is it appropriate to design like this?
2. I'd like to know if there is any Reference data or codes for PSV design.

Thank you for reading my question

[img:center]http://3.bp.blogspot.com/-VaINO6xWOLY/Uf9A3ItCGxI/AAAAAAAAAMQ/OzT9skInQJU/s1600/untitled.bmp[/img]

IMAGE Reference : WHATISPIPING