Using Thicker TEE to Reduce Stresses in B31.3 - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Using Thicker TEE to Reduce Stresses in B31.3

Topic Options

#73348 - 06/15/19 06:08 AM Re: Using Thicker TEE to Reduce Stresses in B31.3 [Re: M Waheed]
engineer001ch Member Registered: 12/21/18 Posts: 28 Loc: China	Found this article about elbow wall thickness https://www.whatispiping.com/several-asm...engineer-part-3 It seems that elbow flexibility may be underestimated when using blank WT field
Top

View All Topics

Entire topic
Subject	Posted by	Posted
Using Thicker TEE to Reduce Stresses in B31.3	M Waheed	06/13/19 08:30 AM
Re: Using Thicker TEE to Reduce Stresses in B31.3	Michael_Fletcher	06/13/19 03:33 PM
Re: Using Thicker TEE to Reduce Stresses in B31.3	M Waheed	06/14/19 03:10 AM
Re: Using Thicker TEE to Reduce Stresses in B31.3	engineer001ch	06/14/19 05:03 AM
Re: Using Thicker TEE to Reduce Stresses in B31.3	Michael_Fletcher	06/14/19 09:08 AM
Re: Using Thicker TEE to Reduce Stresses in B31.3	engineer001ch	06/15/19 06:08 AM
Re: Using Thicker TEE to Reduce Stresses in B31.3	Michael_Fletcher	06/18/19 12:17 PM

Moderator: Denny_Thomas, uribejl

0 registered (), 40 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

April
Su	M	Tu	W	Th	F	Sa
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)