Borzki,
One "small" errata on my first post:
The loading cases should be defined as follow:
SUS W+P1 Snubber Active = NO/disabled
OPE W+P1+T1 Snubber Active = NO/disabled
OPE W+P1+D1+T1+F1 Snubber Active = YES/enabled
where D1 are the displacements from the preceding "W+P1+T1" case in the snubber node, and evaluated in the preliminary/previous static analysis. These displacements should be specified to the attached CNODE restraint, as Michael pointed out above.
Sorry for this mismatch.
_________________________
Dorin Daniel Popescu
Lead Piping Stress Engineer