Suggestion 1: There should be a toggle to display element local coordinate geometry. This would make local restraint summaries more useful. I would suggest the three lines with x,y,z indicators.

The control of the display be toggled between on, off, and active element(s) only.

Local axes should also be able to rotated by the user to fit their needs, and on a per-element basis.

Local axes should be able to be reset to program defaults.

Suggestion 2: The checkerbox arrow for Nozzle Limit can be replaced thusly.

Suggestion 3: Let the user have the option to input allowable nozzle moments in ft-lb instead of ft-in.

Suggestion 4: User defined nozzle limit databases would be helpful.