I have one urgent query regarding the restraint loads reported by restraint and restraint summary.

As an example, at a particular node there is rest support (+Y) with friction and guide support (X) with 3mm gap.

If I extract the restraint report, the loads on rest and guide will be reported differently say,

(Rest)+Y Fx=300 Fy=-3000 Fz= 250
(Guide)X Fx=800 Fy=0 Fz= 0

If I extract the restraint summary report, the loads on rest and guide will be combined,

Fx=1100 Fy=-3000 Fz=250


I am not able to understand why this happens and which one is the actual load on guide support.

My purpose is to provide loading on supports for support design.

Please provide guidance.