Dear Moderator and friends,

a) While performing WRC in CodeCalc, material of Construction selection option is available for Shell and Pipe / Clip.

b) While Performing WRC in PVElite, material selection option is not available for Shell and Pipe / Clip, but PVElite select material for clip same as shell material.

I need clarification on following:

I am performing WRC calculation of Pipe support clip (Cylindrical in shape with SA 106 Br.B) material.
- In PVElite I had model a shell (id 1100mm, material SA 516 Gr.70)
- I had defined clip select shape as circular and given dimension of pipe & applied loads.
- In calculation allowable stress listed are for clip material is same as of shell material i.e. for SA 516 Gr.70. but i am using clip material as SA 106 Gr.B.

I understand there is no option in PVElite (as in CodeCal) to Select material of Clip. its works fine with WRC calculation of Nozzle to shell both material as selected from nozzle input.

Coade to include material selection in WRC of Vesel clip interface in PVElite.

if any method is available, please provide procedure to follow.