Dear SND, SJ

DAVE WORDS -- "If you are using Appx. P in CAESAR II, then any appropriate range calculation (with or without primary components) should be labeled (EXP) and any appropriate operating stress state should be labeled (OPE). Then CAESAR II will use (P1b) as the (EXP) limit and (P1a) for the (OPE) limit".
so from the above sentence ; L6 case is not possible.. any stress range should be labled as EXP OR OCC.

L4-(Ope) W+T+P+H
L5-(Sus) W+P+H
L6-(ope) L4-L5-----------ope stress range
L7-(Exp) L4-L5-----------exp stress range

Please correct me if iam wrong...