Good morning all the members,
Richard, I went through the Help Text and found that they havent mentioned about delta T. But if you go through your post dated on 03/05/12 11:17 AM and your last line of second paragraph you have mentioned about delta T.
I am confused. Please need your support Richard.


If you go to help text and see the example, it showed as mentioned below:
"For example, if the user wanted to enter the thermal expansion coefficient equivalent to 11.37in./100ft., the calculation would be:

11.37in./100ft. * 1 ft./ 12in. = .009475 in./in.

This would be entered into the appropriate Temperature field."

My value is coming 0.3in/100ft and after converting into length/length its coming 0.00025.
So this value 0.00025 I will entered in the temp field.

Kindly suggest.

Response awaited from all the members.

Regards,
Ankur.