I have recently switched to the windows version from the DOS version. One aspect of the output graphics that I have found to be a real problem is the display of the maximum deflections. The problem is that it only shows THE maximum deflection, in the entire model. If I have a large system, with a section of small bore piping that happens to have the highest deflection, I must return to the stone age, and page thru the deflection printouts to find out what the deflections are at any other point of interest in the model, besides the actual maximum deflection, which might be some totally irrelevant point.

Also, when zooming in on a certain section, the program will stil only display the actual ONE maximum deflection, even though it might not be one the screen. What **** !