Export CADWorx file to Caesar - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Export CADWorx file to Caesar

Topic Options

#30975 - 10/28/09 04:05 PM Re: Export CADWorx file to Caesar [Re: WtaDude]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	As long as you enter a number in CADWorx (8.5018 lbs/ft3) that matches a number in CAESAR II, it should work(0.00492 lb/in3). _________________________ Regards, Richard Ay - Consultant
Top