Hello,

If this question would not be related to this forum, please accept my apology.

I am using clamped pipe shoes and have couples of them as line stoppers. One of max axial force is about 50 kN for 12" pipe and 28 kN for 8" which are way high considering pipe size though. Clamp manufacturer's recommended load is 11 kN and 7 kN for 12" and 8", respectively.

Is there any special clamp for sustain this load? Can I use three or more clamps welded to one shoe to distribute loads to each clamp?

Any idea or advice is welcome.

Thanks