Okay, so yes, it is 2:00 in the morning and I should be in bed, but I've been running through this first pass on the hangers so I thought I would upload them to have folks take a look. They are imperial sizes 1/2"-18" and there are 3 different styles to work from. This is the H3 block. These work the same as the guides that we did, replace the H3 block in your support folder, then place off the Spring Hanger on the restraints tools onto the centerline of the pipe. Select 1 for the depth and size, then type in your description. a small 1/2" hanger comes in. Pick the hanger, select the dynamic grip and choose your style and size.

Here's a screen cap of what they look like:



And the link to the file:

http://cid-2bceccbe7007d995.skydrive.live.com/browse.aspx/CADWorx Plant Restraint Tools


Let me know what you think, how they work, and what I should change.

KP