OK, just needed a move, I guess that is still
not there? Or did I miss that too (changed
a tee to an elbow and had to move associated
piping for elbow definition.
Shannon
Originally posted by SLH:
Got it, thanks. I'd skimmed through the tips
but missed that tidbit.
Yes you can do this now. After you
[b]block the elements you want, use the [up] or [down] arrow keys to move the
current element pointer. The copied block will go after this
current element pointer.
This concept is discussed in one of the
CAESAR II Tips articles in the reference section of this web site. Here is a
direct link to applicable article.
There are other
tips articles and
FAQs on this site that you will find helpful. [/b][/QUOTE] [/QB][/QUOTE]