Thanks for you quick answer!
If the lokal forces an moments for the dyn.load case and combination load case (dyn+static)not equal the restraint forces and moments(lokal values will be come from a mode and the restraint values will be come from missing mass),then the user must allways selve calculate the local restraint values with coordinate transformation!
I think that is not a good service.
The best way is Caesar gives local restraint
values.German pipe stress programs (KWU ROHR
and ROHR 2)do it. I hope Caesar can give the
restraint values and the displacements in the future also in the local coordinate system.