Convert a Input from Auto Pipe to Caesar - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Convert a Input from Auto Pipe to Caesar

Topic Options

#17 - 03/28/00 07:04 AM Re: Convert a Input from Auto Pipe to Caesar
Navendu Shrivastava Member Registered: 02/07/00 Posts: 2 Loc: Navi Mumbai, MAH, India	I've tried *.pcf but it gives nominal dia not the actual OD of pipe. How to convert the same in actual OD. Navendu Shrivastava KLG SYSTEL LTD. India
Top

Entire topic
Subject	Posted by	Posted
Convert a Input from Auto Pipe to Caesar	Ohliger	01/11/00 06:28 AM
Re: Convert a Input from Auto Pipe to Caesar	Richard Ay	01/11/00 09:04 AM
Re: Convert a Input from Auto Pipe to Caesar	Navendu Shrivastava	03/28/00 07:04 AM
Re: Convert a Input from Auto Pipe to Caesar	Scott Nickel	03/28/00 09:49 AM
Re: Convert a Input from Auto Pipe to Caesar	Scott Nickel	04/03/00 01:36 PM

Moderator: Denny_Thomas, uribejl

0 registered (), 25 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM