So I have finally gotten a hang of exporting my user components to Isogen. They always come out as just rectangular blocks. So I have played with some of the skeys in the Isogen Cedit. It lists the Identifier = Multi-Port-Component and Default SKEY = XVFL and only lists one end connections & conditions.

The SKEY I would like to us is the MTPL with PCF ID BEND-TEED.

If I only edit the SKEY, does the shape on the ISO stays the same. If I change the identifier, it gives me error -13 and the message file says:


ERROR ON COMPONENT BEND-TEED
ITEM-CODE 4
AT LOCATION -0.01 -0.01 -0.01

(30:3018) ERROR - INCORRECT ENTRIES FOR THE FOLLOWING MANDATORY ITEM
'END-POINT'

(30:3018) ERROR - INCORRECT ENTRIES FOR THE FOLLOWING MANDATORY ITEM
'CENTRE-POINT'

(30:3018) ERROR - INCORRECT ENTRIES FOR THE FOLLOWING MANDATORY ITEM
'BRANCH1-POINT'

(30:3001) *** SEVERE ERROR - PIPELINE REJECTED ***
DATA ERROR


Below is my User component data file.


SWEPT TEE
1.0000 G/CM3 DENSITY

("NOM SIZE" "OD" "WGT")
=======================================================
(100.0000 114.3000 1.0000 (0.0000 0.0000 0.0000)(421.2593 0.0000 0.0000)(307.3755 -193.0755 0.0000) 1 )