How to reduce Forces and Moments around Nozzle Connection?

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » How to reduce Forces and Moments around Nozzle Connection?

Topic Options

#10939 - 04/26/07 01:47 AM Re: How to reduce Forces and Moments around Nozzle Connection? [Re: Damanpreet Singh]
Siv Member Registered: 02/01/07 Posts: 51 Loc: india	1000 N is a very small load for this pipe size. Turbines generally have robust casings. Are the units OK? Siv
Top

Previous Topic

Index

Next Topic

Entire topic
Subject	Posted by	Posted
How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/24/07 05:53 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	MoverZ	04/24/07 06:23 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	John C. Luf	04/24/07 07:25 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Dave Diehl	04/24/07 07:52 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/25/07 02:25 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	MoverZ	04/25/07 03:43 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/25/07 10:40 PM
Re: How to reduce Forces and Moments around Nozzle Connection?	Siv	04/26/07 01:47 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/26/07 02:33 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	MoverZ	04/26/07 03:32 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/26/07 05:45 AM
Re: How to reduce Forces and Moments around Nozzle Connectio	John C. Luf	04/26/07 08:11 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	MANKO	05/09/07 05:01 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	anindya stress	05/09/07 07:21 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	SKK	04/26/07 09:57 PM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	04/27/07 09:14 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	anindya stress	04/27/07 09:34 PM
Re: How to reduce Forces and Moments around Nozzle Connection?	sam	04/27/07 10:29 PM
Re: How to reduce Forces and Moments around Nozzle Connection?	anindya stress	04/28/07 02:06 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Damanpreet Singh	05/09/07 01:55 AM
Re: How to reduce Forces and Moments around Nozzle Connection?	Saneh	05/09/07 03:09 AM

Moderator: Denny_Thomas, uribejl