Dear all,
I have a problem again. When I launched the program there was an error message poping up " fatal error # 5100,The cpu time/date stamp is easlier than the last access time of the ESL device.This is usually caused by in incorrect boot date. Note that the time and date of the machine are stored on the ESL each time and analysis is performed. Back-dating the machine before the ESL will cause this error" and I cannot use this program. Could you tell me how to solve this problem ?

Thank you very much
Best Regards,

This problem can be caused by:

• Moving the ESL between machines with different times (and dates).
• Running game software that corrupts the time/date setting on the machine.
• Some type of software crash that corrupts the time/date setting on the machine.

You should make it a habit to check the time/date setting on your machine, as many processes depend on this being correct.

To resolve this issue, perform the following steps:

• Start the program and click past the error message. This will leave you on the Main Menu.
• Pull down the "ESL" menu and select the option to "Generate access codes".
• E-Mail these codes to COADE, and state in the e-mail that you're getting error 5100.
• We will respond with the necessary reauthorization codes to reset the time/date stamp on the ESL.
• When you receive these codes, you need to go back to the "ESL" menu and select the option to "Enter reauthorization codes".
• Enter the four codes on the first line of the grid and click [OK]. You should be all set from here.