pipingdesignonline.com

Topic Options
#74214 - 11/21/19 03:26 AM CADWorx 2019 iso continuation not showing from xref
jdright2711 Offline
Member

Registered: 04/25/18
Posts: 67
Loc: Ireland
i have attached a piping model as an xref and then ran a line from that xref on a new model. When i run my isobatch the continuation to the line on the xref is not showing. Continuations will show OK if both pipe-runs are in same model. This was not a problem on previous versions. Anyone come across this and have a solution.

Top
#74216 - 11/21/19 05:15 AM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
Vanman Offline
Member

Registered: 02/03/06
Posts: 2768
Loc: JHB South Africa
What build are you using? I just tested this scenario with the latest 2019 and it works as advertised.
_________________________
Cadworx User

Top
#74217 - 11/21/19 05:21 AM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
jdright2711 Offline
Member

Registered: 04/25/18
Posts: 67
Loc: Ireland
What do you mean by build? Running CADWorx 2019 SP1 on AutoCAD 2018?

Top
#74218 - 11/21/19 05:22 AM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
jdright2711 Offline
Member

Registered: 04/25/18
Posts: 67
Loc: Ireland
Should also mention it is a Metric project.

Top
#74219 - 11/21/19 06:04 AM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
jdright2711 Offline
Member

Registered: 04/25/18
Posts: 67
Loc: Ireland
Sorted it thanks, USEXREF OBJECTS from config file had been switched to NO by someone.

Top
#74224 - 11/21/19 10:56 PM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
Vanman Offline
Member

Registered: 02/03/06
Posts: 2768
Loc: JHB South Africa
Build is usually referred to as the software version being used. BTW 2019 SP1 is a little out of date.

Glad you got it working.
_________________________
Cadworx User

Top
#75418 - 02/11/21 08:32 AM Re: CADWorx 2019 iso continuation not showing from xref [Re: jdright2711]
treysoucie Offline
Member

Registered: 02/10/10
Posts: 220
Loc: New England & Houston
Im having similar issues here but only when its xrefs that are more than 2 levels deep. meaning we have skid piping xrefed into a skid model, then the skid model xrefed into an overall model where we would drop isos from. its basically 2 levels deep. the continuations show up when we drop isos from the base piping skid model or the overall skid model that has the piping base model xrefed in, but the master that xrefs the overall skid model the continuations wont populate.


Attachments
Capture4.PNG

Capture5.PNG


_________________________
Design/Drafting Supervisor
TreySoucie@sbcglobal.net

Top



Moderator:  Dominik Hepp 
Who's Online
1 registered (shasgulan), 28 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
March
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Stats
11857 Members
14 Forums
16508 Topics
73471 Posts

Max Online: 303 @ 01/28/20 11:58 PM
Top Posters (30 Days)
Borzki 11
danb 8
Vanman 7
Michael_Fletcher 6
treysoucie 6

pipingdesignonline.com