#75414 - 02/11/21 12:55 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
I did some Tests, looks like if continuation graphics is set to anything other than 0 the continuation message is not displayed. I logged a support case for feedback, perhaps you could do the same.
_________________________
Cadworx User
|
Top
|
|
|
|
#75758 - 07/29/21 11:28 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 02/10/21
Posts: 1
Loc: Calgary, Alberta
|
Hi Everyone,
Wondering if there has been a fix for the continuation issue? We are about to run ISO's on a project and are still only able to get continuations to work if continuation graphics count is set to 0. Thanks in advance.
Snitker
|
Top
|
|
|
|
#75759 - 07/29/21 11:06 PM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
I believe a fix for that was made available some time ago.
_________________________
Cadworx User
|
Top
|
|
|
|
#75916 - 10/22/21 08:01 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
im running 2020 R2 now AND THIS STILL ISNT FIXED! come on Hexagon!
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75926 - 10/26/21 01:10 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
This was fixed in one of the service packs in 2020 R1 already ? Recently did training on 2020 R2 and we used continuation graphics without problems.
Can you check if it reproduces for one of the default styles ? Might be style or model related.
_________________________
Cadworx User
|
Top
|
|
|
|
#75933 - 10/26/21 07:49 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 02/28/06
Posts: 1646
|
This was fixed in one of the service packs in 2020 R1 already ? Recently did training on 2020 R2 and we used continuation graphics without problems.
Can you check if it reproduces for one of the default styles ? Might be style or model related. It's listed as being addressed in the 2020R1 HF1 readme.
_________________________
If you are going to fly by the seat of your pants, expect friction burns.
|
Top
|
|
|
|
#75948 - 10/29/21 09:55 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
ill have to check it with the default style but we had hexagon on the phone and confirmed it still not working right.
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75949 - 10/29/21 10:53 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: dgorsman]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
This was fixed in one of the service packs in 2020 R1 already ? Recently did training on 2020 R2 and we used continuation graphics without problems.
Can you check if it reproduces for one of the default styles ? Might be style or model related. happens in all styles and various models.
It's listed as being addressed in the 2020R1 HF1 readme.
doesnt appear to have been fixed. see attached pics using ootb isogen style. Cont graphics set from 0 to 3 in order
Attachments
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75957 - 11/01/21 11:13 PM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
It works on my installation. Are you perhaps toggling the single PCF checkbox for IGB ?
_________________________
Cadworx User
|
Top
|
|
|
|
#75963 - 11/03/21 12:24 PM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
no not toggling the single pcf radio button
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75965 - 11/05/21 01:21 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
Can you upload your model here? Just a question when moving to R2 did you create a new config file ? in 2020 R2 the setting was renamed to IsogenContinuationGraphicsLevel.
_________________________
Cadworx User
|
Top
|
|
|
|
#75967 - 11/05/21 09:18 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 07/18/07
Posts: 638
Loc: Denver, CO
|
Good thing the Whats New explains all of this What's New in Plant CADWorx Plant has had the following enhancements for 20.2 (2020 R2): CADWorx Plant is now compatible with AutoCAD 2022. CADWorx Plant is now compatible with BricsCAD 21. For information on releases before 20.2, see Update History (page 770). Customer Support Anti-Piracy Statement Copyright 2003-2021 Hexagon AB and/or its subsidiaries and affiliates Published 8/5/2021 at 11:28 AM Vanman, I don't see that change anywhere in my Dialogs or Imperial.cfg files. My settings still show: IsogenContinuationGraphicsCount=0 Is there something special that needs to be done?
|
Top
|
|
|
|
#75970 - 11/08/21 01:00 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
Sorry Guys, looks my one computer had a different language file loaded, so it changes how that setting is displayed in the dialog box. The actual config setting remains unchanged.
That being said though, when upgrading its usually a good idea/workflow to setup a fresh config file from scratch for a new project.
_________________________
Cadworx User
|
Top
|
|
|
|
#75972 - 11/08/21 10:00 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 07/18/07
Posts: 638
Loc: Denver, CO
|
Thanks for confirming, it would be great if they would start putting in ALL changes that affect the users.
I agree it is best to use the config that comes with each version and modify those settings to match your project. Then you can use that one as a default going forward. It saves a lot of confusion down the road and since HCAS doesn't document their changes, you should notice them at that point.
|
Top
|
|
|
|
#75973 - 11/08/21 11:19 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
nope we didnt do that, but we cant use R2 due to a POD graphics error and linking back to our excel that spits out data from out line lists. R2 is dead in the water for us now. I will test this out though cutting a new cfg and see if it fixed that
Attachments
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75974 - 11/08/21 11:30 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
see attached line no. 1703
Attachments
PM-IG-SKID-test.zip (152 downloads)
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75975 - 11/08/21 11:43 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: Vanman]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
Can you upload your model here? Just a question when moving to R2 did you create a new config file ? in 2020 R2 the setting was renamed to IsogenContinuationGraphicsLevel. Sorry Guys, looks my one computer had a different language file loaded, so it changes how that setting is displayed in the dialog box. The actual config setting remains unchanged.
That being said though, when upgrading its usually a good idea/workflow to setup a fresh config file from scratch for a new project. even with the ootb R2 cfg file the cont graphics set to 2 or 3 look messed up
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75977 - 11/09/21 05:16 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
A quick glance looks like the continuations are working on your model, sort of. Used a setting of 3.
The one problem I did pick up was the continuation on the valve V1738.
I am really not sure why the pipe is not shown dotted and where is it getting supplemental flow arrow from ? Continuation is also shown on the Tee and not at the flange. I am guessing it has something to do with the ubolt and the pipe.
Trey can you try do a convertfromprjdata on those components ?
Attachments
1_-NG-1703-N6.0B.DWG (149 downloads)1_-NG-1703-N6.0C.DWG (145 downloads)
Edited by Vanman (11/09/21 05:22 AM)
_________________________
Cadworx User
|
Top
|
|
|
|
#75978 - 11/10/21 08:02 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
i did a convertfromprj with no change to that continuation
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75980 - 11/11/21 12:08 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
Trey, I am not sure why this is not working correctly on your model. To my mind it points to something model related, but could be mistaken.
Can you try the test model I created on your side.
Attachments
Continuation Test.dwg (65 downloads)LINE-1-Iso.DWG (149 downloads)LINE-2-Iso.DWG (145 downloads)
_________________________
Cadworx User
|
Top
|
|
|
|
#75981 - 11/11/21 12:25 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
Trey, how you are you adding the Isogen Supplemental flow arrows?
I see them appear on the Isos, but I am unable to locate them in the model ?
I moved your model to different coordinates, the supplemental flow arrows are then not shown on the Isos and the continuations from what I can see are coming through correctly.
Attachments
1_-NG-1703-N6.0J.DWG (140 downloads)1_-NG-1703-N6.0K.DWG (138 downloads)
_________________________
Cadworx User
|
Top
|
|
|
|
#75983 - 11/12/21 06:48 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
i fear we mustve had a dirty/corrupt model. ive copied the pipeline to a new sheet, then remodeled the pipe and nipples and its now showing the graphics fine. ill have to see if i can track down how this particular piper made this model. it does appear to be fixed when i remodel this myself in a clean drawing.
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75985 - 11/12/21 08:09 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 07/18/07
Posts: 638
Loc: Denver, CO
|
Could it have been a model from a previous version? We have recently seen issues with older models being used in a newer version and causing problems, by re-drawing the models the issues were fixed.
I don't recall the exact scenario, but we put the model into a database and had it redraw in a new model and it was better.
You might try running a change spec on the parts so CADWorx redraws the items instead of using the database that doesn't redraw everything.
|
Top
|
|
|
|
#75986 - 11/12/21 10:38 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/10/10
Posts: 250
Loc: New England & Houston
|
they were 2020 R1 models but all 2020 CW variants had broken cont graphics when set to 2 or 3. now R2 PODgraphics is messed up and wont let us drop isos into borders that populate data from excel sheets lol. it never ends!
_________________________
Design/Drafting Supervisor TreySoucie@sbcglobal.net
|
Top
|
|
|
|
#75987 - 11/12/21 01:08 PM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 07/18/07
Posts: 638
Loc: Denver, CO
|
now R2 PODgraphics is messed up and wont let us drop isos into borders that populate data from excel sheets lol. it never ends! Could always use ISOWorx as an independent and stable option to update your titleblocks. We are adding in some new status tracking functionality and other enhancements that should be available in the next few months.
|
Top
|
|
|
|
#75992 - 11/16/21 04:30 AM
Re: Cadworx 2020 and 2020 R1 isogen batch issues?
[Re: treysoucie]
|
Member
Registered: 02/03/06
Posts: 2884
Loc: JHB South Africa
|
The PGP problem is a little annoying. An interim workaround is open the models in 2020 R1, run batch isos and then close without saving.
_________________________
Cadworx User
|
Top
|
|
|
|
|
0 registered (),
34
Guests and
1
Spider online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
12065 Members
14 Forums
16973 Topics
75151 Posts
Max Online: 303 @ 01/28/20 11:58 PM
|
|
|