Hello,

I have a question about what seems as a graphic bug on one of my 90 degree bends. The bend in question is not being represented with bend box checked.

[img:left]https://imgur.com/L2dFJBp[/img]

Is there an underlying reason for this or is this just a graphical bug I should ignore ?

Thanks

A bend will only be drawn when the second half of the bend is next sequential element.

I.e. 10-20-30 will draw a bend if 20-30 follows after 10-20, and bend is applied on 10-20.

However, 10-20-30 will not draw a bend in any of the following cases:

1.
10-20 (bend)
100-110
20-30

2.
20-10 (bend)
20-30

3.
10-20 (bend)
30-20

etc.

Yes, I know this.

I found and corrected the error. There was a phantom element inserted after element 1340-1350 with TO node left blank. I must have clicked INSERT ELEMENT twice and only filled out the second new element info, somehow succeeding in continuing the model with element 1350-1360.

Thanks for your feedback!