Not sure what version this might have changed or if there is a way to fix. Previous version (2015) I don't recall the PSV size in the BOM being reversed. On (2019) it is.

To maybe simplify when you go to component edit on a PSV it will have "inlet x outlet" However on the BOM generated from isogen it has the "outlet x inlet". Is there a way to fix this other than manually changing the face of the iso?

Unfortunately, problem is in base catalog specification where is larger x smaller and PCF file (which is input for ISOGEN) catch that order an post it on N.S. in material list. I don't see any Isogen switch to correct that. But usually clients don't complain about it.
However, there is one thing in I-configure which is called Display SmallxLarge NS, in Materials/Drawing Material List/Setting. There is some input table for that, but I don't know how to prepare it.

Thanks. It worked by using the record identifier 90 & 93 in the text box for the relief valves. Now sizes come out on Iso BOM in same sequence as the component shows in the model.

Hi Robert,

Can you send a screen capture of the syntax for Relief valve settings. I am trying to find out how put the settings in I-Config but can't find any.

you mention "...text box for the relief valves"

we are getting the 2x1 (Outlet x Inlet) when it should be the other way around.

Please let me know what I need to do to accomplish this.

Thanks

Since this ancient forum does not let you attach a screen shot and I don't have anywhere to put a url image hopefully this wording will be sufficient. I did not do myself but one of the tech guys here figured it out from the help above.

In I-configure go to Materials>Drawing Material List>Settings>Display SmallXLargeNS click on the arrow to expand text box type in following:

90
93

In our case those values fixed our issue if those do not work try:

75
76

deleted