Having more study to do, I am undergoing quite an ordeal in achieving what was known as a "Style 3" type of materials list in our custom SPOOL drawing configuration (see item 2 below), I am not there just yet and request your assistance.

QUESTION: How are lined borders around each "cell" assigned using I-Configure?

1.) This includes but is not limited to the material list. Although the material list is most likely the only list we will use here.

2.) Initial setup using I-Configure and a custom 11x17 sheet size yields an undesirable TEXT ONLY LIST so far.

3.) We have owned CADWorx for several years now. I explored the ISOGEN setup configurations before the release of the I-Configure application and still have the printed documentation showing "Style 3" that is mentioned above.

UPDATE: An excellent and just-watched YouTube video provided setup tips on ISOGEN with I-Configure. ( https://www.youtube.com/watch?v=1LRRVenMsa4 )

Formal in-person training is out of the question.
I recently enrolled in Tony Horn's series on CADWorx Plant-P&D-Structure
at www.pipingdesignonline.com - HIGHLY RECOMMENDED

I thank you all for your patience.