Is it possible to get the nozzle size and rating onto the iso in addition to the nozzle description and associated equipment number currently shown at continuation point?

I dont think this is possible with the equipment modeller or the ENGENERIC command.

It should however be possible if you use a long weld neck flange and then change the SKEY to Nozzle/NZFS.

You would be able to add custom data to the long weldneck, then have that called out on the iso with component attribute mapping.

It does however mean you would need to change all the nozzles in your model

I would usually include these as optional components in every spec, as there's always places where designers don't want to create a full equipment model.

And while there's complaints that it should be a weld neck flange component ("but they don't look like that!"), it does make them visually stand out in the model.

Thanks guys, I'll give that a shot.

Leverage the Search function in iConfigure
Vessel tag & nozzel # but not rating

Easy to do using equipment modeler. Just add size and rating to your nozzle description. Example: N2 (4"-150#)
Isogen will show it just like that.