Ranjit,
Start with the bottom ellipsoidal head; add a cylinder and a conical transition. Then add a skirt, at this point the program will ask you if this skirt separates 2 vessels, click on "ON". A skirt will be added but it would be the same diameters as the conical bottom portion. It overlaps the cone in the 3d graphics, but you can tell by element description on the left. So, change the skirt diameter at the base and the graphics become clearer.
This should work. If you still have questions let us know.
_________________________
Best Regards,
Mandeep Singh
CADWorx & Analysis Solutions
Hexagon PPM