Topic Options
#70834 - 01/23/18 04:48 PM Grayloc library
Ken Offline
Member

Registered: 11/01/06
Posts: 34
Loc: Edmonton, AB
Hi,

Have a client that's requested Grayloc piping that needs to be revised on CADWorx2012 setup and cant see a generic specs in CADWorx2012.

Any ideas where to find these kind of piping specs or is it called something else in CADWorx2012.

Ken

Top
#70840 - 01/23/18 11:19 PM Re: Grayloc library [Re: Ken]
Vanman Offline
Member

Registered: 02/03/06
Posts: 2881
Loc: JHB South Africa
I dont believe this was ever available with CADWorx 2012. There was an older imperial Victaulic spec if I remember correctly.

If you are wanting to do clamped piping, I would recommend taking a look at 2017 or 2018. These versions have some updated component architecture and features to support these systems.
_________________________
Cadworx User

Top
#70847 - 01/24/18 09:13 AM Re: Grayloc library [Re: Ken]
dgorsman Offline
Member

Registered: 02/28/06
Posts: 1646
Greylock requires some special treatment. As mentioned there is Victaulic content available directly from that vendor, but nothing Graylock.
_________________________
If you are going to fly by the seat of your pants, expect friction burns.

Top
#70910 - 01/29/18 10:54 AM Re: Grayloc library [Re: Ken]
Ken Offline
Member

Registered: 11/01/06
Posts: 34
Loc: Edmonton, AB
Thanks for your input.
I ended up customizing a STUB END Flange file as well new Gasket/bolting files in CADWorx2012 c/w a AutoCAD 3D clamp solid to be inserted as an graphic representation.

Ken

Top



Moderator:  Dominik Hepp 
Who's Online
0 registered (), 37 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
February
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28
Forum Stats
12057 Members
14 Forums
16957 Topics
75094 Posts

Max Online: 303 @ 01/28/20 11:58 PM