pipingdesignonline.com

Topic Options
#60249 - 08/29/14 10:43 AM Steel Plate BOM Cutlist
AAB Offline
Member

Registered: 08/16/14
Posts: 9
Loc: Oklahoma
Back in Cadworx 2012, steel cutlist would group Plates of same size together as same item number. This is plate using Draw Plate. with Cadworx 2013, Plates of same size (using Draw Plate) are not being grouped together. is there a switch somewhere to group these together?

Same size plates (using Base Plate) are grouped together.

Anyone have this issue?

thanks,
AB

Top
#60290 - 09/02/14 08:06 AM Re: Steel Plate BOM Cutlist [Re: AAB]
Matt.Worland Offline
Member

Registered: 07/18/07
Posts: 513
Loc: Denver, CO
Make sure you are running the latest Service Pack. The last build I have for 2013 is R2 SP3 July 23, 2013. It should be fixed in that release.
_________________________
matt worland
ECE Design

Top
#60309 - 09/03/14 12:25 PM Re: Steel Plate BOM Cutlist [Re: AAB]
AAB Offline
Member

Registered: 08/16/14
Posts: 9
Loc: Oklahoma
ooops... I'm running CW Professional 2014 SP1. Is there a new SP for 2014?

Top
#60326 - 09/04/14 09:10 AM Re: Steel Plate BOM Cutlist [Re: AAB]
Rocker Offline
Member

Registered: 09/09/04
Posts: 434
Loc: Calgary, Canada
There is a hotfix for 2014 after SP1. Don't know if that addresses your particular issue though.
_________________________
Vince Wehnes, C.E.T.

Top
#60449 - 09/12/14 09:43 AM Re: Steel Plate BOM Cutlist [Re: AAB]
Matt.Worland Offline
Member

Registered: 07/18/07
Posts: 513
Loc: Denver, CO
Originally Posted By: AAB
ooops... I'm running CW Professional 2014 SP1. Is there a new SP for 2014?
There is a hotfix for SP1 that can be found out on Smart Support.

I would aslo make sure you are running the SBOMTOTAL command and not SBOMSINGLE.

In my tests, SBOMTOTAL combines like components properly.
_________________________
matt worland
ECE Design

Top
#61590 - 12/19/14 10:18 AM Re: Steel Plate BOM Cutlist [Re: AAB]
Kather Offline
Member

Registered: 08/28/06
Posts: 161
Loc: Colorado
Originally Posted By: AAB
Back in Cadworx 2012, steel cutlist would group Plates of same size together as same item number. This is plate using Draw Plate. with Cadworx 2013, Plates of same size (using Draw Plate) are not being grouped together. is there a switch somewhere to group these together?

Same size plates (using Base Plate) are grouped together.

Anyone have this issue?

thanks,
AB


Digging up an old post...

AAB,
Was this issue ever resolved for you? We are picking up a bunch of skid design currently and the BOM output for plate is ridiculous. We are also seeing issues with BOM weight totals.

Matt,
Are there a separate SP or HF installs for Steel Professional? I cannot seem to find them. If I try to run the CADWorx Plant SP or HF on Steel Pro, I only get options to install Plant, P&ID, or fieldPIPE.

Thanks!
_________________________
Jason Kather

Top
#61591 - 12/19/14 11:03 AM Re: Steel Plate BOM Cutlist [Re: Kather]
Matt.Worland Offline
Member

Registered: 07/18/07
Posts: 513
Loc: Denver, CO
2015 Steel Professional has not been released yet. Maybe sometime in January/early February.
_________________________
matt worland
ECE Design

Top
#69898 - 09/06/17 02:08 PM Re: Steel Plate BOM Cutlist [Re: AAB]
gb Offline
Member

Registered: 03/23/09
Posts: 1
Loc: canada
I am having the same issue in Cadworx 2015. Steel plate of same size and weight are not being grouped together in material list. Is there a fix for this?
Thanks

Top
#70401 - 11/16/17 03:26 PM Re: Steel Plate BOM Cutlist [Re: gb]
AAB Offline
Member

Registered: 08/16/14
Posts: 9
Loc: Oklahoma
gb... currently, I'm running CW2016 Pro. There is a way to group steel plates of same size and weight, like the old way back in CW2012.
Go to Steel>BOM>Setup...click Sort Order. In BOM Column Selected, this list needs to narrowed down to two. I use PART_NUMBER and STEEL_TYPE. I have my own version of Part numbers, of course.

When you run Steel Bill of material, do Run > CUT. Doing TOTAL.. you will still get N/A for quantity.

I hope this helps.

AAB

Top
#70402 - 11/16/17 03:37 PM Re: Steel Plate BOM Cutlist [Re: Kather]
AAB Offline
Member

Registered: 08/16/14
Posts: 9
Loc: Oklahoma
Kather...

BOM output for plates is ridiculous. It needs to rewritten like old way.

anyway, to get total weight, I use SCG and TCG (selecting only steel). For small skid design, weights come out fine. But for large skid design, weight outputs show a significant differences. There seems to a big issue with CW2016.

Hopefully there'll be a fix someday.

AAB

Top
#70460 - 11/23/17 11:53 AM Re: Steel Plate BOM Cutlist [Re: AAB]
Rocker Offline
Member

Registered: 09/09/04
Posts: 434
Loc: Calgary, Canada
I wonder if they fixed this in Structure 2018. Have you checked that out?
_________________________
Vince Wehnes, C.E.T.

Top
#70511 - 11/28/17 08:54 AM Re: Steel Plate BOM Cutlist [Re: Rocker]
AAB Offline
Member

Registered: 08/16/14
Posts: 9
Loc: Oklahoma
I haven't looked at Steel 2018 yet. I hope it's fixed/updated.

Top



Moderator:  Dominik Hepp 
Who's Online
0 registered (), 22 Guests and 2 Spiders online.
Key: Admin, Global Mod, Mod
September
Su M Tu W Th F Sa
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30
Forum Stats
11526 Members
14 Forums
15565 Topics
70045 Posts

Max Online: 126 @ 05/09/18 04:29 PM

pipingdesignonline.com