Under the Design/Analysis Constraints input, there is a checkbox for corroded hydrotest. However, the output for the zick analysis of hydrotest did not give the results of corroded shell thickness if the checkbox was ticked, the program still used the uncorroded shell thickness in the calculation. Please advise. Thank you.

Dear SHLye,

Thanks for noting the problem. The program should indeed be using the corrosion allowance for Zick calcs (Hydrotest case) if the box is checked. This issue will be resolved shortly and the fix will be available in the next version. The 4.2 version should ship during July/August 2001.

Best Regards,

Scott Mayeux