Hello Stressers

I work on CII mainly with EN Standrads and with metric system.
I have a problem because CII does not accepts a value of WT equal 10 mm
This value always is change to 6.375.
How to solve this issue ??

PS: Maybe someone else have similar problem

Regards
____________________________
Adrian

Enter your 10mm thickness as 9.999 or similar. Caesar is reading it as a SCH 10 wall.

You have to go to Configuration file, Database definition and to change Piping size specification from ANSI to DIN.
This will solve your problem, but remember that the OD will not be updated automatically.

Regards,

Thank You very much for this advice.

MoverZ I did it this way but it's not exactly it.

Dan thanks I forgot to change it but unfortunately, this has not change in my configuration file.

Regards to all