Element 10-20 ..... 90-100 wave loads to be applied:
- check the wind/wave checkbox on 10-20 only, specify wave, then define the wave data during load case setup.
Element 101-110 ..... 140-150 wave loads are not to be applied:
- check the wind/wave checkbox on 101-110 only, specify OFF
Element 150-160 ..... 190-200 wave loads to be applied:
- check the wind/wave checkbox on 150-160, specify wave, the wave data setup during load case definition will apply.
If there are additional elements following 190-200 they will assume this last wave loading.
_________________________
Regards,
Richard Ay - Consultant