Hello everyone

I made model with CADWorx plant please refer to "11.jpg"

I can see flange is separate from valve but i use "system out" to share model with CAESAR II.

The flange is not separate from valve.

Did i miss some option? or How can I separate flange from valve.

Thank you

Your model does not suffer if two or more rigid elements in series are represented by a single rigid element with the same length and weight.
You can replace the single rigid element in CAESAR II with a flange-valve-flange by clicking on that element and then click on the valve/flange database and specify flange-valve-flange.
Check the numbers.

Thank you very much Diehl.

It is very helpful.

But Do i have to replace elements every time when I Open elements file which made by CADWorx?


I thought that works automatically.