use of different codes in analysis - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » use of different codes in analysis

Topic Options

#63082 - 05/20/15 07:25 AM use of different codes in analysis
Ferex Member Registered: 11/29/07 Posts: 88 Loc: Italia	hi everybody, my question is: is it possible to use different codes for piping analysis? For example, is it possible calculating thickness with B31.3 and doing flexibility analysis with B31.8? Thank you...
Top

#63094 - 05/24/15 10:13 AM Re: use of different codes in analysis [Re: Ferex]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	Yes, in a CAESAR II analysis you can have different sections of pipe associated with different Codes. However, the computations for a particular pipe element will all be made to only one Code. _________________________ Regards, Richard Ay - Consultant
Top

Moderator: Denny_Thomas, uribejl

0 registered (), 43 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM