Nozzle Thickness as per API 650 Table 5.6 - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » TANK » Nozzle Thickness as per API 650 Table 5.6

Topic Options

#62848 - 04/26/15 08:36 PM Nozzle Thickness as per API 650 Table 5.6
FAIZOL1982 Member Registered: 10/27/14 Posts: 6 Loc: KERTEH, TERENGGANU	Dear Team Members, As understood, Intergraph TANK not analyse / calculate the nozzle thickness as per API 650 Table 5.6. Icon nozzle shown in the software is only for "low tank nozzle". Is it correct? Advice me if i'm wrong. Your cooperation and prompt respond are appreciated. Thanks in advance. Faizol
Top

#62849 - 04/26/15 10:44 PM Re: Nozzle Thickness as per API 650 Table 5.6 [Re: FAIZOL1982]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	Correct. TANK performs the nozzle stiffness and deflection calculations as per Appendix P. _________________________ Regards, Richard Ay - Consultant
Top

View All Topics

Moderator: Luis Sanjuan

0 registered (), 27 Guests and 2 Spiders online.

Key: Admin, Global Mod, Mod

April
Su	M	Tu	W	Th	F	Sa
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)