Allowable stress range for UNS31803 in caesar II 2014 - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Allowable stress range for UNS31803 in caesar II 2014

Topic Options

#61842 - 01/20/15 12:46 AM Allowable stress range for UNS31803 in caesar II 2014
MAHESH3091990 Member Registered: 06/04/14 Posts: 11 Loc: MAHARASHTRA	Hello , When i am using caesar 2014 version allowable stress range that caesar is calculating for A790 S31803 is incorrect . It is taking value of expansion stress as Sc . If i run similar input file using earlier version ( Caesar 2013 ) , it is calculating value correctly as 1.25Sc+0.25Sh . Kindly advice .
Top

#61846 - 01/20/15 08:20 AM Re: Allowable stress range for UNS31803 in caesar II 2014 [Re: MAHESH3091990]
Pablo_GH Member Registered: 05/18/13 Posts: 52 Loc: Spain	Dear, Which CAESAR II 2014 version and build are you using? From other post answered by Richard: Originally Posted By: Richard Ay The quickest way to resolve this is to compare the data in the database with the applicable Piping Code. Be aware that v.6.10 addresses specific Editions of the Piping Codes, and subsequent Code Editions may have changed some of the data. If you find a difference, you can always use the Material Database Editor to modify the values in the database. Regards,
Top

#61847 - 01/20/15 08:23 AM Re: Allowable stress range for UNS31803 in caesar II 2014 [Re: MAHESH3091990]
Dave Diehl Member Registered: 12/14/99 Posts: 2382 Loc: Houston, TX, USA	You will have to substantiate this claim if you wish to a direct response. _________________________ Dave Diehl
Top

#61889 - 01/22/15 10:18 PM Re: Allowable stress range for UNS31803 in caesar II 2014 [Re: Pablo_GH]
MAHESH3091990 Member Registered: 06/04/14 Posts: 11 Loc: MAHARASHTRA	I am using CAESAR II version 2014 7.00.00.2800 (build 140416) . Kindly advice .
Top

#61898 - 01/25/15 10:31 AM Re: Allowable stress range for UNS31803 in caesar II 2014 [Re: MAHESH3091990]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	The equation to determine the allowable expansion stress has not changed. You question cannot be answered in this Forum, we need to see your job file to determine why you are not seeing the results you expect. Please open a Support Request on Smart Support and send in the job file. _________________________ Regards, Richard Ay - Consultant
Top

#61907 - 01/28/15 05:33 AM Re: Allowable stress range for UNS31803 in caesar II 2014 [Re: MAHESH3091990]
MAHESH3091990 Member Registered: 06/04/14 Posts: 11 Loc: MAHARASHTRA	Ok . Thanks . I will open support request on smart support .
Top

View All Topics

Moderator: Denny_Thomas, uribejl

0 registered (), 31 Guests and 0 Spiders online.

Key: Admin, Global Mod, Mod

May
Su	M	Tu	W	Th	F	Sa
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)