Hi,

We run a code calc for support plates on Code calc 2014 and our results shows passed. But our fabricator did the same Code calc 2014 and their result shows it fails on clips. We checked both inputs and found that both are matching.Kindly check and advice what is the problem. why the result are different.

Thanks
NMV

Dear NMV
Pl. check unit of both file. It's not same.

For GC-1111.cc2 -> Moment is in "N-mm"
For GC-1111-1.cc2 ->moment is in "N-m"

Hope, you know implication of such SMALL error.