Beyond ASME B16.48 - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Beyond ASME B16.48

Topic Options

#5793 - 06/14/06 06:01 AM Beyond ASME B16.48
Arijit Member Registered: 11/29/02 Posts: 42	ASME B16.48 is a dimentional standard limited till 24" size of paddle spacers, figure-8 flanges, blanks, etc. Are there standards which cover sizes more than in ASME B16.48 for the same item? _________________________ ----
Top

#5794 - 06/14/06 12:41 PM Re: Beyond ASME B16.48
El Gringo Member Registered: 03/27/05 Posts: 53 Loc: Colombia	Arijit, I’m fairly certain there are no U.S. standards available. You can of course use the B31.3 equation (paragraph 304.5.3), which is the basis of B16.48, or the B31.1 equation (paragraph 104.5.3). Neither equation is restricted by an upper NPS limit. Regards, _________________________ Ricardo
Top

Moderator: Denny_Thomas, uribejl

0 registered (), 46 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM