Hi,
We have an end user who is getting the
Hasp Key not found (H0007)error when he trys to run Ceaser II from a remote office.
- It runs fine in our head office
- The offices are connected via a WAN link
- The two offices are on different subnets
- The Monitoring software can see the Hasp (now that I updated the nethasp.ini file)
I have updated the nethasp.ini file etc... I can ping the licence server that has the hasp connected.
Any ideas that I can try?
[NH_TCPIP]
;
; NetHASP does not support TCP/IP under DOS.
;
;
; Section-specific Keywords for the TCP/IP protocol.
;
NH_SERVER_ADDR = 10.110.11.12 ; IP addresses of all the NetHASP
; License Managers you want to search.
; Unlimited addresses and multiple
; lines are possible.
;
; Possible address format examples:
; IP address: 192.114.176.65
; Local Hostname: ftp.aladdin.co.il
;;NH_PORT_NUMBER = <Num> ; Set the TCP/IP port number. This is
; optional. The default number is 475.
NH_TCPIP_METHOD = TCP ; Send a TCP packet or UDP packet
; Default: UDP
NH_USE_BROADCAST = Disabled ; Use TCPI/IP Broadcast mechanism.
; Default: Enabled
;;NH_SERVER_NAME = <Name1>, <Name2>, ; Communicate with the NetHASP
; Server with the specified name.
; Maximum: 6 names, up to 7
; case-insensitive characters each.
;
; General Keywords.
;
NH_SESSION = 10 ; See Adapting the Timeout Length
NH_SEND_RCV = 10 ; in the HASP Programmer's Guide.
NH_SEARCH_METHOD = Internet ; The two possible values are 'localnet' and 'internet'
; This tag specifies if the client should look for the
; License Manager on a local network or out on the
; internet.
Previous Topic
Index
