HI DEAR SIR .I'M WORKING ON STEAM PIPING ACC. TO API 560.WOULD YOU PLEASE CHECK MY MODELING AND GIVE ME SOME ADVISE.
BY THE WAY ;IT IS CREATED AR CAESAR II VER5.1
I'M LOOKING FORWARD YOUR ATTENTION
BEST REGARD

You should be paying a professional engineer to check your input.

hi dear engineer. Thanks for reply. but i just need to decrease boiler flange force and momentum.
best regard

Quote ....... "i just need to decrease boiler flange force and momentum"

If you are a stress engineer, this is fundamental to your job.
If you are not, IMHO, you should not be dabbling with Caesar II.

hello moverz
I'm a new beginner stress engineer.but i know fundamental of stress engineering as well as you.i just did wanna to make a better case or suggestion to this project.
take it easy,

API 560 is for fired heaters. That suggests very high temperatures and probably superheated steam. A nasty killer in the wrong hands.

Just whose opinion were you wanting to put forward to your project ? Your own, or someone's from this forum ?

hello dear moverz.
i had some problem due to huge axial force on stoeper ( pipe rack) at below load cases.after that i decided to add 3 expansion loop on pipe rack.now this problem is solved.and i modified supporting and reached to 3.API FORCE AND momentum.
1- U(0CC))(WITH FRICTION,AND NO FRICTION)
2-W+P+T+U(OPE)(WITH FRICTION,AND NO FRICTION)
ANY WAY I DO CARRY OUT THIS PROJECT .FINALLY I SEND A PICTURE FROM THIS PROJECT TO PROVE MY ABILITY.
HAVE A NICE.

Arta888,

I hope you have had all your calculations checked independently. Have a nice day.