Dear,
When I use option ( Use Metric ASME Materials Databases)and I run analyze I get error describe in image.
Can anyone help me whit this problem?

Can you attach the model file?

IS THIS PROBLEM RESOLVED.
I'm also facing the same ERROR.if someone know the solution, Please let me know...

sorry for the waiting, here is the model file. I didnt solved the problem.

Hi,
It seems that the error is with external pressure temperature. External pressure chart HA-3 starts from temperature of 40°, and PVElite might be interpolating values from 40°C onwards (refer tabular values for Fig HA-3). May be moderators can explain further...

In short, for this case, you can enter some value for external design temperature and the value should be more than 40°C e.g. 41°C. I tried this...it works....

Thanks!


Regards.

Hello Guys

This problem has been fixed. If you have the R1 version of the 2012 PV Elite, you can download a hot fix on our eCustomer site. If you have not acceseed the eCustomer site before, you can find it as follows:

If you are a domestic (America based) customer of CAESAR II, PV Elite, or TANK, please go to https://crmweb.intergraph.com and log your SR (or request a login if you don’t have one yet).

If you are an international customer or a CADWorx customer, please go to http://www.coade.com/Support/Dealers.shtml to find out who to contact for support.