Dear all,
Can someone tell me why Output stress summary shown "NO CODE STRESS CHECK PROCESSED"?

I posted the input of first section for your review below:
---------------------------------------
From 100 To 200 DZ= -205.000 mm.
PIPE
Dia= 762.000 mm. Wall= 14.300 mm. Insul= .000 mm. Cor= 2.0000 mm.
Mill%(-)= .50
GENERAL
T1= 65 C P1=7100.0000 KPa PHyd=8875.0000 KPa Mat= (306)API-5L X65
E= 205,610,000 KPa EH1= 200,665,008 KPa EH2= 203,395,328 KPa
EH3= 203,395,328 KPa EH4= 203,395,328 KPa EH5= 203,395,328 KPa
EH6= 203,395,328 KPa EH7= 203,395,328 KPa EH8= 203,395,328 KPa
EH9= 203,395,328 KPa v = .300 Density= .0078 kg./cu.cm.
Fluid= .0000390 kg./cu.cm.
RIGID Weight= 3,730.00 N.
RESTRAINTS
Node 100 ANC
ALLOWABLE STRESSES
B31.8 (2007) Restrained = ON Sh1= 448,159 KPa Sh2= 448,159 KPa
Sh3= 448,159 KPa Sh4= 448,159 KPa Sh5= 448,159 KPa Sh6= 448,159 KPa
Sh7= 448,159 KPa Sh8= 448,159 KPa Sh9= 448,159 KPa Eff= 1.0000
Sy= 448,159 KPa Fac= .5000
---------------------------------------
Output - Stress Summary:
---------------------------------------
NO CODE STRESS CHECK PROCESSED: LOADCASE 4 (EXP) L4=L1-L3

Highest Stresses: ( KPa ) LOADCASE 4 (EXP) L4=L1-L3
CodeStress Ratio (%): 0.0 @Node 7700
Code Stress: 252944.9 Allowable: 0.0
Axial Stress: 105579.5 @Node 7200
Bending Stress: 232970.2 @Node 7700
Torsion Stress: 19.5 @Node 3407
Hoop Stress: 0.0 @Node 200
3D Max Intensity: 291876.3 @Node 7700
---------------------------------------
I am embarrassed with this report.
Thanks in advance!
Minh Trung.

Read this previous thread, which is a sticky topic at the top of the forum.