Hello,

I have a problem with a pipeline analysis working on CAESAR II 5.20.2
It is as follows:

By setting the Minimum Allowable Bend Angle, the smallest value that allows me to enter is "1". This forces me to reduce the radius from 50 meters to 8 meters in order to not generate 3200 errors like: "Bend Angle 197 to element 198 is 0.17 Deg. It must be Between 1.00 and 135.00 Deg."

I used to set values between 0.1 to 135 Deg. on CAESAR 5.10.00.

Could someone tell me if this range is modified on the CAESAR II 5.20.2 differently? Or there is another solution to get it?

Thank you for your help.

You should be able to select 0.1 from the drop list in the Configuration Module. What is preventing you from doing this?

Richard:

The options listed do not have the option of 0.1, starts at 1.

this is version 5.20.2 CAESAR II

You should have the 0.1 option, but if you don't, you can enter the value that you wish directly from the keyboard. Or you can edit the file caesar.cfg using Notepad.

danb
The windows configuration and minimum values ​​that I can select is 1.
In the options selected at least shows that the lowest selectable value is 1.
Try typing position 0.1 and enter the new value is 1.

Sorry, the problem was that I had misconfigured my keyboard and did not put the comma,single dot.

Greetings.