Is there a way to set up a new Pressure/Temp Case in Version 5.10 by copying pasting one of the previous cases. I want to set up a case 5 which is very similar to Case 1 but with minor editions. My system is complicated and I want to avoid filling out all the P/T data again.
In Autopipe you can copy the P/T data in the spreadsheet to carry over to a new case. Is something like this possible in Caesar?
No. I m talking about definig the pressure / temperatures. I want to analyse a new bypass case where most temp / pressure of the system are same as case 1 except the Bypass lines pressure / temperatures.
I looked in the load case editor. I don't think you can define(fill in) the P/T data there? thanks