It seems to me like there are a lot of experienced Caeser II users on this forum.

I am looking for recommendations for learning tools or advice on how to start using Caesar II. I have experience using a few different types of analysis software; Ansys, Cosmos, STAAD etc. I know that everyone learns differently, but here are some general questions that I've been curious about.

What is the best way (in your opinion) to learn Caeser II?
What have your experiences been working with this software compared to other types of analysis programs?
Are there any other quality online resources available?

Thanks in advance!

Louie

To be involved into a project where to have to perform calculations with Caesar.

Regards,

Remember that Ansys, Cosmos and other types of generic finite element analysis software is just that, generic software. CAESAR II is programmed to do two things:
1. make a (linear) finite element analysis of the system using 3D beam elements.
2. calculate code stresses and compare them with the allowable code stresses.

If you have experience with Ansys and other FEA, you'll probably know something about FEA. To start using CAESAR II you also have to know the piping code as specific input is required.

CAESAR II in itself is not that difficult to work with, but please first study the codes and then CAESAR II, not the other way around.

@danb
Luckily I am!

@corne
Thanks for the advice! I am familiar with some codes, including the necessary ones for this project. I also have some experience with using STAAD, which is similar in it's input (as I'm noticing) and it's beam type elements. My ANSYS experience is also mostly in classic, which uses the same sort of nodes->lines->cross-section hierarchic.

Keep em coming! I appreciate any thoughts on the matter. I'm currently reading through the user guide.

L

Also it's good to attend one of the CAESAR II training sessions which held by Coade frequently. You will get lot of tarining materials. Learning this software takes just 2 weeks but understanding what you are doing takes 5-6 years

Indeed, because "need" is the engine that move you forward.

Regards,

Thanks for the advice guys. I've been using CAESAR II regularly for about a year now and things have been going well. I took the Dynamic Training Course in Houston last November, which also helped learn some subtleties. And, I'm still learning a lot.

-Louie